FVSCM1 Powder Actuated Fasteners, Drive Pins with1 Wahser100pcs/pack 4 Pack
12 sold in last 24 hours
- Workable for all popular powder fastening systems and single pin Concrete Nailers
- Ballistic point and smooth shank makes the penetrating easier and lower defect rate
- Special treated pins are so tough they can penetrate dense concrete, masonry joint or structural quality steel. Plated surface makes the pins durable and suitable for treated lumber
- Pins measure 3/4 "-3 ". With a .300 " Head diameter, .145 " Shank diameter and .315 " diameter flute
- 1 " Diameter Washer increases bearing surface against the material to be fastened. Particularly used for fastening wood to concrete, wood to steel, steel to concrete and steel to steel. Massive Package of 4 box/pack, 100 pcs per box
Estimated shipping
Select a product to estimate shipping.Special treated pins are so tough they can penetrate dense concrete, masonry joint or structural quality steel.
Powder Actuated Fasteners Specification
Fasten in concrete with 3" spacing between fastenings and edges. Penetrate 1" into concrete, with a thickness 3 times the embedment depth.
Fasten into steel, use a minimum 1-1/2" spacing and be 1/2" from edges. Length should fully penetrate for maximum hold. Steel 3/16"-5/16" thick.
For concrete: 3" spacing, 3" from edge, 1" embedment Concrete should be 3 times embedment depth. In masonry, use horizontal joints.
Fastening into steel: 1-1/2" spacing, 1/2" from edge. Fastener should penetrate completely. Steel thickness 3/16" to 5/16".
What does it mean about "LOW VELOCITY" on the package?
A power actuated tool functions much in the same way that a firearm works in that a small chemical propellant charge fires a PISTON which drives the fastener home. Most of these tools available in the United States today are considered LOW VELOCITY.
What kind of material does the Pin work with?
It works with most of the concrete and steels. However it does not work well with very hard materials, such as cast iron, hardened steels, rock, face brick, glazed tile, or glass block.
What about the package of Pins?
Ordinary package is 100(+_3)pcs/box. The box is taped for safe transport via courier. Some sizes are available in wholesale package.
How to use Powder Actuated Fasteners
This is showing how to use.
One must be licensed to use a powder actuated tool.
Product details
| Main Specification | |
|---|---|
| Tillverkare | FVSCM |
| Unit Count | 400 greve |
| Dimensioner L x W x H | 11.73 x 7.17 x 3.46 inches |
| Utanför Diameter | 1 inches |
| Brand varumärke | Fvscm |
| Fastener Type | Powder |
| Punkt Diameter | 0.15 Inches |
| Antal bitar | 400 400 400 400 |
| Trådstorlek | 0.145 inches x 0.145 inches |
| Materialmaterial | Carbon Steel |
| Färg | silver silver silver |
| Storlek | 1" |
| Punktvikt | 7.71 ounces |
| Product information | |
| Antal Packs | 4.4 4. |
| Ställ namn | Powder Actuated Fasteners Set (400 Piece) |
| Technical Details | |
| Delnummer | PW100-4 |
| Modellmodell | PW100-4 |
| Materialtyp | Carbon Steel |
| Antal objekt | 400 |
| Kompatibel Groove Diameter | 1 inches |
| Maximal Shear Styrka | 250 Mpa |
| Style | |
| Finish Typer | Zinc Chromate |
| Measurements | |
| Objekt Dimensioner | 11.73 x 7.17 x 3.46 inches |
| Others | |
| Produkttyp | Powder Actuated Fasteners |
| Item Shape | Runda |
| Storlek Namn | 1" |
| Skruv huvudstil | Flat |