iVAC Automated Switch Box (SB-NA)
4 sold in last 24 hours
- CSA and UL approved for use in North America
- Three Modes: Auto, Off, and On
- Delayed start (0.5 to 2 seconds) prevents circuit breaker trips on tool start-up. Delayed stop (approx. 6 seconds) keeps the vacuum running ~6 seconds after tool stops to clear lingering dust.
- Healthier air: Reduces airborne dust throughout your shop and home
- Can be used with two separate 15-amp circuits, one for the tool and one for the vacuum
- Built-in Protection: 15A circuit breakers on both tool and vacuum cords
- Simple Setup: Plug-and-play—no tools or wiring needed
- Controls shop vacuums up to 6.5 Peak HP and dust collectors up to 1 HP
Estimated shipping
Select a product to estimate shipping.The World’s Finest Automated Dust Control System
HEALTH - SAFETY - CONVENIENCE - Automatic startup of your dust collection system
Three Modes of Operation – Auto, Off and On
Turn On Delay – avoids circuit breakers being tripped
Turn Off Delay – ensures that your work area continues to be cleared of remaining airborne debris even after the tool has powered down
Dual Inputs – permits operation from two separately protected AC circuits, when the combined power from the tool and the vacuum exceeds 15 Amps
Power Cord Protection – both power cords are individually protected with two 15 Amp circuit breakers
Continuous Operation – designed for continuous operation of your shop vac for other cleanups
iVAC Switch products automatically turn on your dust collector keeping your home workshop cleaner and healthier by reducing dust build-up and mitigating airborne dust particles
Easy-to-use, easy to install
You'll never say: "I'll clean it up later" again
Shop dust control is critical for workshops, and woodworking in general
iVAC automated dust collection system makes your shop safer and more convenient so you spend less time cleaning and more time creating
iVAC automated dust control systems are used in schools, by trades and in professional workshops to ensure optimum dust control
SB-NA iVAC Automated Dust Collection Switch
HEALTH
The iVAC Dust Collector Switch Box is an inexpensive, simple to use automated dust controller that activates your shop vacuum automatically whenever the power tool to which it’s attached is turned on
With this easy-to-use dust collector switch, you’ll be amazed at how much cleaner renovation work can be
Dust and debris is collected immediately, extraneous airborne dust is mitigated and clean-up is much easier
SAFETY
Focus on your work! Don't concern yourself with turning your dust collection system on and off
You’ll breathe easier, and ensure a safer working environment, the iVAC Switch Box powers up immediately, it helps to clear out any debris that may be stuck in the power tool and which can become a dangerous projectile – however small
The iVAC Dust Collector Switch Box automatically turns the shop vacuum on before you actually begin your cut, and will continue to draw debris as long as the power tool is on
Installation is simple. If you can connect an electrical cord, you can connect an iVAC Dust Collector Switch
CONVENIENCE
The iVAC Dust Collector Switch Box was designed specifically for the home, where typically only 115Vac services are available
It is designed to control Shop Vacs up to 5 Peak HP and Dust Collectors up to 1 HP
The attached power tool can literally be any type of 115V-15A power tool such as
a light-duty table saw
a portable sander
dremel tools
a miter saw
265,000 CYCLES "ZERO" FAILURES
iVAC has just completed testing of the improved Automated Dust Collection Switchbox SB-NA using a 6.5 peak HP shop vac
Major announcement following soon!
"WE RAN 265,000 CYCLES WITH NO FAILURE"
FUNCTIONALITY
It removes the distraction of turning a dust collection system on and off while operating potentially dangerous power tools
It ensures that dust and debris are collected as you cut, as opposed to being cleaned up with greater difficulty after the mess is done
It mitigates airborne dust by trapping it while it’s being generated by the power tool
Airborne dust is hazardous and can lead to a variety of ailments
Uncollected dust can be a hazard as it can make surfaces like hardwoods and laminates slippery and can lead to a fall
Tools can be notorious for sending out residual debris when they are first powered up because we tend not to clean the surface after every cut.
iVAC FAMILY of TOOLS
Our iVAC family of automated dust collector products includes:
iVAC Pro Switch – the heart of the system. Receives signals from iVAC tool interfaces and instructs dust collection systems/shop vacuums to turn on or off accordingly
iVAC Tool Interfaces – these devices connect to the power tool and communicate wirelessly to the iVAC Switch and include the iVAC Pro Tool Plus Sensor and iVAC Pro Tool Interface
iVAC High Power Interfaces – allow you to connect dust collectors of up to 10 HP ( iVAC Contactor ) and high-power tools ( iVAC Pro Tool HP )
Automated Blast Gates – for controlling your dust collection ports and optimizing dust collector performance
Product details
| Main Specification | |
|---|---|
| Specifikation Met | CSA or Ul |
| Kompatibla enheter | Table Saws or sanders or 115V power tools or shop-vac style vacuums up to 6.5 Peak HP or dust collectors up to 1 HP or mitre saws |
| Tillverkare | BCTINT |
| Unit Count | 1 Räkna |
| Kontrollmetod | Touch |
| Controller Type | Push Button |
| Kontaktmaterial | Koppar |
| Kontakttyp | Normalt öppet |
| Nuvarande Rating | 15 A |
| Operativ spänning | 120 volt |
| Terminal | Blade |
| krets typ | parallellt |
| Aktuatortyp | Push Button |
| Brand varumärke | iVAC |
| UPC | 643504236256 718122426393 |
| Kontrolltyp | automated |
| Operation Mode | On-OFF |
| Wattage | 2640 watts |
| Anslutningstyp | Plug In |
| Monteringstyp | Wall Mount |
| Punktvikt | 1,7 pund |
| Product information | |
| Växla typ | Rocker |
| Technical Details | |
| Delnummer | 10031-010 |
| Modellmodell | SB-NA |
| Materialtyp | Acrylonitrile Butadiene Styrene |
| Internationell skyddsrating | IP54 |
| Antal positioner | 2 2 2 |
| Anslutningsprotokoll | X-10 |
| Measurements | |
| Objekt Dimensioner | 10.8 x 7.8 x 2.2 inches |
| Others | |
| Produkttyp | Vacuum & Dust Collector Parts |